Our race series long-travel kit for the F-150 is for the serious offroader. We’ve addressed every aspect of the suspension utilizing the factory mounting points. The kit consists of fabricated boxed lower arms that utilize 1″ uniballs at the inner pivots and a 1.5″ uniball at the spindle. The fabricated spindles use our 2.25 race hubs and Wilwood 4 piston brakes. The tubular chromoly upper arms pivot on 3/4″ FK JMX heims. The steering tie rods are machined from heat-treated stainless steel and use a 3/4″ heim at the inner pivot and a 7/8″ heim at the outer. The kit is 5″ wider per side, has 3.5″ of lift built into the spindle and will pull 16-18″ of wheel travel depending on the shock and engine cage setup. Billet upper arms are available as an upgrade.